Specifications; Operation - Grundig 871125206978 Bedienungsanleitung

a Electronic Baby Scale
For using and maintaining the baby scale, please read these instructions completely before operating.

SPECIFICATIONS

• Equipped with a high precision 'strain-gauge' sensor and high performance CPU (Central Processing Unit)
to ensure weighing accuracy.
• Capacity: < 20kg
• Display resolution: 10g
• Tare function.
• Auto power off.
• Low voltage indicator
• Battery: 2 AAA batteries
• Operating temperature range: 0°C- 40°C
• Display: LCD, 3 units supplied,
KEY FUNCTIONS
• ON/OFF/TARE key: Power on, Power off, Tare
• UNIT keys: select the units of measurement: kg/lb

OPERATION

• Remove the scale from the packaging, open the battery cover and install the batteries in the battery holder.
• Put the scale on a flat table, making sure it is stable.
WEIGHING YOUR BABY
1 Press the "ON" key to turn on the power. "Hi " appears in the display to greet you, followed by "0.00"..
2 Press the UNIT key, you can choose "kg", "lb".
3 Put your baby on the scale, the LCD display shows the baby's weight.
4 Press the "OFF" key for 2 seconds to switch off the scale.
! Ensure that the scale stands stably on a flat surface before weighing.
! Make sure that the baby lies still on the scale.
ERROR DISPLAY
• When the scale is over loaded, "EEEE" appears in the display.
• When the display shows
USING AND INSTALLING THE BATTERIES
• Use 2 AAA batteries
• Open the battery cover on the back, put 2 AAA batteries in the battery holder (make sure the poles are
positioned correctly) and close the battery cover firmly again.
ADVICE FOR USE AND CARE
• Put the scale on a clean, flat table.
• To ensure long life, do not expose the scale to water or extremes of heat and cold.
• The product is a high precision electronic weighing device, do not press hard on the scale or drop it as this
may cause damage.
• If the scale surface is dirty, clean the scale with a soft cloth, do not use any chemical cleaning agents and do
not allow water to penetrate inside the scale.
• If the display value is incorrect make sure the batteries are adequately charged and make good contact with
their terminals. Replace the batteries if they have been in use for a lengthy period of time and try again. If the
problem persists, please contact your local retailer.
31675 manual_aangepast.indd 2
, the voltage is too low; you must change the batteries as soon as possible.
23-06-17 08:49