Product Description; Intended Use; Type Plate; Product Liability - Husqvarna PP 70 Montage- Und Bedienungsanweisung

8. RCD reset knob
9. RCD test button
10. Transportation handle
11. Water connector inlet
12. Operator's manual

Product description

The product is a power pack, that is used together with
Husqvarna electrical power tools. For more information,
refer to the operator's manual for the power tool.
This product has embedded connectivity. Refer to
Embedded connectivity on page 3 .
Embedded connectivity
Husqvarna Fleet Services
management solution that gives the fleet manager an
overview of all products that are connected via either
embedded or aftermarket sensors. The sensors record
data like runtime, service intervals, location, and more.
For more information about Husqvarna Fleet Services
download the iOS or Android app Husqvarna Fleet
Services at https://apps.apple.com/se/app/husqvarna-
fleet-services/id1334672726 or https://play.google.com/
store/apps/details?id=com.husqvarna.hfsmobile&hl=en.
Products with embedded connectivity are connected via
the embedded Husqvarna Fleet Services
have Bluetooth Low Energy (BLE). For more information
regarding how to use it, refer to
connectivity on page 7 . For information of the BLE
technology radio spectrum, refer to
connectivity on page 13 .

Intended use

This product is used to operate applicable Husqvarna
electrical power tools with a high frequency motor, for
example power cutters and drills. All other use is
incorrect.
The product is kept cool with water. Always use the
product with water.
The product is for professional operation only.
Symbols on the product
WARNING: Not careful or incorrect use can
result in injury or death to the operator or
others.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Inspection and/or maintenance must be
done with the motor stopped and the power
plug disconnected.
1244 - 002 -
™
is a cloud asset
™
sensor that
To use embedded
Embedded
This product is in compliance with applicable
EC directives.
The product agrees with the applicable
Australia and New Zealand electromagnetic
compatibility directives.
The product agree with the Restriction of
Hazardous Substances Directive.
The product or package of the product is not
domestic waste. Recycle it at a recycling
station for electrical and electronic
equipment.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.

Type plate

™
,
1
2 3
Model
XX XX
Husqvarna Identity No. (HID)
6
XXXXXXXXXXXXXXXXXXXXXXX
HUSQVARNA AB, SE-561 82 HUSKVARNA, SWEDEN
7
MADE IN LITHUANIA
1. Manufacturer
2. Model
3. Product number
4. Serial number
5. QR code
6. Identity number
7. Manufacturer address

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
5
4
Serial No.
Product No.
XXXXXXXXX XXXXXXXXXXX
QR
3