Silvercrest SFT 76 Gebrauchsanleitung Und Sicherheitshinweise Seite 57

Step 4: SFT 76
Automatic transfer of data
directly after a measurement:
The app must be opened
and Bluetooth ® must be
activated on the device
and smartphone to do so.
The "HealthForYou" app must be activated for transfer. We wish to
expressly indicate that the software at hand is not a medical product in
accordance with the EU directive 93/42/EEC.
The displayed values are intended merely as a visualisation and may
not be used as the basis for therapeutic measures.
Step 2: "HealthForYou" App
Start the "HealthForYou" app and follow the instructions.
Select the SFT 76 in the settings menu of the app and
connect the device. A randomly generated six digit PIN
code will be displayed on the thermometer when con-
necting for the first time. At the same time, an entry field
will appear on your smartphone where you should enter
this six digit code. If it is entered correctly, the thermome-
ter will be connected to your smartphone.
Step 3: SFT 76
Carry out a measurement.
Step 4: SFT 76
Transferring the data at a
later point in time:
Go to memory recall mode ("display saved measured
values"). Bluetooth transfer begins automatically.
®
GB/IE 57