Menu Navigation - Bosch Indego M 700 Originalbetriebsanleitung

28 | English
Place the mower in the docking station and make sure that
the docking station is connected to mains (LED on docking
station is on). The mower must be switched on, the display
alight and the battery must be at least 70% charged.
When the update starts, the following message appears in
the display "Do you want to update from version x to ver-
sion y?"

Menu Navigation

The table below explains the various menu items.
Main Menu Sub-menu 1
Mow now
Only with
Indego M 700:
Bosch AUTO
Calendar
Only with
Indego M+ 700:
SmartMowing
Schedule
Off/Manual
Settings
Mowing mode
F 016 L81 885 | (23.10.2019)
Confirm by pressing the confirm button ✓. During the up-
date, both LEDs in the mower will flash.
At the end of the update, the mower restarts.
Remove the USB OTG cable and the USB.org stick. Close the
cover of the USB port.
Additionally with Indego M+ 700: You can download the
software via the Bosch Smart Gardening app.
Sub-menu 2 Explanation
Pressing the confirm button will send the mower to mow. In "Off/
Manual", the mower works until the display shows "garden com-
plete".
In "Schedule" mode, with the "Bosch AUTO" calendar function or
with the Bosch "SmartMowing" functionality, the mower will op-
erate until the end of the time period or until the display shows
"garden complete" (whichever comes first).
The "Bosch AUTO" calendar function is optimised based on the
size of the lawn area.
In the default setting, the mower does two full cuts a week and
starts at 8 am.
The following settings are possible:
Number of com- 1 to 3
plete mowing
cycles per week
Weekday Days on which mowing is allowed (e.g. to exclude Sundays).
Start time Only possible for the first time slot (applies to all active days).
The Bosch "SmartMowing" function is optimised based on the
size of the lawn area and gives additional functionality to connect
to a local weather data provider.
In the default setting, the mower does two full cuts a week and
starts at 8 am.
You can set up your SmartMowing schedule by using the free
Bosch Smart Gardening App.
Edit (selected day) Program a mowing schedule by setting individual mowing days
and slots (up to 2 per day).
Don't mow/Delete This will delete the corresponding slot for the selected day.
slot
The number of full cuts per week for the actual schedule are shown
at the bottom of the display.
Choose this option when no schedule should be used. The mower
starts mowing only by activating "Mow now".
With Indego M+ 700 you can start mowing, by pressing the
"mow" button on the free Bosch Smart Gardening App.
SpotMow Select between a size of 2 m x 2 m, 3 m x 3 m and 4 m x 4 m.
Mow without dock- Mower will mow in the additional lawn area without docking sta-
ing station tion in random mode until it runs out of battery.
Border cut Select between the mower cutting the border once every full cut
(default setting), once every two full cuts, or not performing a bor-
der cut (off).
Bosch Power Tools