Replacing The Remote Control Battery; Storage When Not In Use - Silvercrest 279334 Bedienungsanleitung

Delaying the alarm signal (Snooze)
Press the TIMER button [44] on the remote control to delay the alarm for approx. 8 minutes. In
addition to the alarm symbol the text "ZZZ" will appear on the display [2].
Cancelling the alarm signal
Press the On/Standby button [17] on the Micro Stereo System or the On/Standby button
[26] on the remote control to cancel the alarm signal.

10. Replacing the remote control battery

Please also read the safety instructions for the coin cell battery in the "Safety
instructions" chapter.
Replace the battery when it is empty. Proceed as follows:
1. Press the spring of the battery holder inwards.
2. At the same time, pull the battery holder out of the
remote control.
3. Remove the battery from the battery holder.
4. Insert a new CR2025 lithium battery. Always pay
attention to the polarity. Note the polarity symbol
on the lithium battery and on the battery holder (+
symbol).
5. Insert the battery holder carefully into the remote
control.

11. Storage when not in use

If you will not be using the Micro Stereo System for a long period of time, unplug it from the mains
and store the Micro Stereo System in a dry and cool place. Also remove the battery from the
remote control.
SilverCrest SMBC 30 A1
English - 53