Memory And Viewing Options; Connecting The Product To A Tv; Connecting The Product To A Computer - Silvercrest SAK 4000 A1 Bedienungs- Und Sicherheitshinweise

Memory and viewing options

Connecting the product to a TV

You can view the LCD touch display
trolled via the LCD touch display
are shown.
Note: To do this you require an additional micro HDMI to HDMI
cable (not included).
Switch the product on (see chapter "Switching the product on
and off").
Insert the micro HDMI end of the additional HDMI cable into
the micro HDMI port
the HDMI output on the TV.
On your TV, select the correct source. To do so, refer to your
TV's operating instructions.

Connecting the product to a computer

You can connect the product to your computer using a USB cable
to use the product as a webcam and to transfer data to the computer.
The product can only be connected using a USB 3.0 connection
or higher. Using a USB 2.0 connection or smaller is not permitted.
Connect the product to your computer using the USB cable
In advance, select the option "Data storage mode" to use the
product as an external storage device, or select the option "PC
camera" to use the product as a webcam (see chapter "General
settings").
82 GB/IE/NI
on a TV screen. It is con-
5
, on which all control elements
5
and the HDMI end of the cable into
10
,
56
.
56