Hama Black Thunder Bedienungsanleitung Seite 5

LED flashes per
interval
-
1 x
2 x
3 x
4 x
Note
To avoid annoying flashing and save energy,
the charging station LED only flashes when the
extension battery is being charged or discharged,
or 20 seconds after the last charging or
discharging process.
• After charging is complete, disconnect the
extension battery from the relevant power source.
• Now connect your extension battery to your
original Sony Dualshock4 controller using the
output socket (B).
• Set the output switch (C) to On as soon as your
controller has a low battery level. The controller
should be at least halfway discharged.
• Set the output switch on the extension battery to
Off if the extension battery is completely empty or
your controller is fully charged.
Charging status of
the extension battery
5% or less
5-25 %
25-50 %
50-75 %
75-100 %
Note
• The charging status LED (D) on the extension
battery indicates that the extension battery
is discharged by no longer flashing in the
charging or discharging status.
• You can also check the charging status of your
controller with the extension battery plugged
in using the PS4 Home menu by holding
down the Home button on the controller. The
controller charging status is displayed in the
lower right corner of the screen in the PS4
menu.
Warning
If the extension battery is always left on while on
the controller, the battery performance and the
service life of the built-in battery will decrease
over time. This is not the case if the output switch
(C) on the extension battery is moved to Off as
soon as the controller is fully charged or the
extension battery is completely empty.
4. Technical Specifications
Capacity of the Black
Thunder extension
battery
Average charging time
of the Black Thunder
extension battery
Input
Output:
Batt. type:
Min.:
Typ.:
1000 mAh
4 hours
5 V 480 mA
5 V 800 mA
3,7 V Lithium polymer
960 mAh / 3,55 Wh
1000 mAh / 3,7 Wh
3