Attaching.the.cushion - Pioneer KURO KRP-TS02 Bedienungsanleitung

Attaching the Cushion
This part prevents reflection of the cables connected to the
back of the Pioneer display and television on the base cover.
Attach.it.after.anchoring.the.base.cover.on.a.flat.stable.place.
1
En
Attachment Procedure
1
. Peel.off.one.side.of.the.double-stick.tape.on.
the.cushion.and.attach.the.cushion.onto.the.
base.cover.
•. Be.careful.that.the.cushion.does.not.catch.on.the.pipe.
insertion.holes.
•. Anchor.it.in.place.so.that.there.are.no.gaps..If.there.is.a.gap,.
the.cushion.may.peel.off.
2
. After.attaching.the.Pioneer.television.onto.the.
stand,.peel.off.one.side.of.double-stick.tape.
and.attach.the.light-blocking.pad.onto.the.
position.in.the.bottom.diagram.(PDP-LX00./.
PDP-LX00H./.PDP-C0A.only).