Safety Note - LG LN500 series Bedienungsanleitung

Safety note

<When you use the software to upgrade Firmware>
1) The power should be supplied during upgrading Firmware.
- Connect cigar cable or DC adapter to device.
- Fully charge the device when using the built-in battery of it.
2) Do not disconnect USB cable during upgrade.
If the USB cable is disconnected during upgrade, the error mes-
sage will be shown. Click [OK] to let the application to be termi-
nated automatically.
- Error message : USB is disconnected! Close to terminate the
<Map CD (Optional)>
1) For detail the direction (about map handling), see User's Manual
in LGE PC portal on CD.
application.
4