Miele KSK 1002 Side by Side Kit Montageanweisung Seite 23

^ Remove the protective backing from
adhesive tape b.
^ Insert plugs into the upper holes c
in the heating mat whilst holding it
away from the bottom of the
appliance.
^ Press the heating mat against the
appliance from top to bottom and
insert the plugs into holes d at the
bottom of the heating mat.
^ Loosen screws e from the
connection box cover.
^ Then remove cover f.
^ Connect cable g.
^ Refit cover h.
^ Tighten screws i on the connection
box cover.
^ Loosen screws j at the rear of the
appliance. Do not unscrew them
completely.
^ Then hook the cable cover supplied
into the slot on the side-wall-heating
mat.
^ Hang the cable cover over the
screws k at the rear of the
appliance.
^ Tighten screws l.
en
23