Maintenance - Makita 3706 Bedienungsanleitung

When connecting to Makita dust collector, connect the
hose for the dust collector directly to the dust nozzle.
Fig.17

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Drywall guide bit 1/8", 1/4", 3 mm, 6 mm
•
Collet cone 6 mm
•
Collet cone 6.35 mm (1/4")
•
Adapter 3.18 - 6.35 mm / 3 - 6 mm
•
Wrench 17
•
Circular guide
•
Vacuum cover
•
or attachments
Only use accessory or
are
7