Operation; Overview - Sony LKRI-004 Bedienungsanleitung

Operation

Overview

The DVI Interface Board LKRI-004 is an optional input board designed
for mounting into an SR projector. You can input DVI signals
(progressive signals only) by connecting this board with a computer.
The board only complies with the signals (progressive signals only)
below.
If the SR projector into which the board is mounted is incompatible with
signals, the signals cannot be input.
Signal
1024 × 768@60 (VESA)
1280 × 960@60 (VESA)
1280 × 1024@60 (VESA)
1600 × 1200@60 (VESA)
1920 × 1200 (VESA 2.30MA-R)
1920 × 1080 (CIA/CEA-861B)
∗)
2048 × 1080
∗)
1920 × 1080
∗)
2048 × 1080
∗)
2048 × 1080
∗)
The signals above are based upon Sony unique specifications. For details, please consult your Sony
dealer.
You cannot use the LKRI-004 with some types of SR projectors. For
details on available devices and firmware, please consult your Sony
dealer.
Note
Note
Frame rate (Hz)
60
60
60
60
60
60
60
24
24
48
Dots clock (MHz)
65.00
108.00
108.00
162.00
154.00
148.50
148.50
74.25
74.25
148.50
Operation 17