Samsung SSG-S3000GR Handbuch Seite 2

4. The message "Bluetooth headphone is connected." will be displayed on the TV screen when a
connection to the Bluetooth headphones is established.
Now, a beep indicates that a connection is established. The speakers will output sound.
✎ The message "Cannot connect to bluetooth headphone." will be displayed on the TV screen if a
connection to the headphones fails.
✎ If the connection fails, press the power button on the 3D glasses for 2 seconds and retry pairing
starting from step 3. Ensure the glasses are close to the TV.
<Pairing is needed again in the following occasions>
– The 3D glasses do not function even when the power button is pressed (after the 3D TV was
repaired).
– You want to view 3D video on a new Samsung 3D TV released in 2011.
‹ Using the 3D glasses
Powering on the 3D glasses
1. Briefly press the power button on the 3D glasses that were paired successfully.
2. The green LED will turn on for 3 seconds and a beep will indicate that a connection is being
established again.
3. Sound will output from the speakers if a connection is established.
✎ Control the volume using the volume control (+/-) buttons. A beeping sound indicates that the
volume is maximized or minimized.
Powering off the 3D glasses
1. Briefly press the power button.
2. The red LED of the power button will turn on for 3 seconds and there will be a beeping sound.
3. The 3D glasses will power off.
English-2
‹ Charging the battery (more than 3 hours is required)
If the red LED of the power button blinks every 3 seconds, charge the battery on the glasses as shown
below. The charging status LED will turn red when charging is in progress. The charging status LED will
turn off when charging is complete.
SAMSUNG TV
USB1
USB
PC
Micro USB cable
Notebook PC
‹ Viewing guidelines
Audio on this product is only available when 3D mode is selected in Store Demo mode.
✎ If the 3D glasses do not function in 3D mode, the speakers will not function.
✎ Both the 3D glasses and speakers do not function in 2D mode.
The power cannot be turned on or off if the green or red LED of the power button is on.
There will be no audio output if the sound is muted on the TV.