Table of Contens
Table of Contents
Overview ......................................................................... 16
Installation ...................................................................... 21
Overview
The DSBK-210 SDTI-CP Output Board is an optional board
for the Sony DSR-2000/2000P Digital Videocassette Recorder.
Installing this board in the DSR-2000/2000P allows connection
to an MPEG-supporting recorder (such as the MSW-2000/
2000P or MAV-555/2000), equipped with an SDTI-CP
interface.
The video signals output by this board comply with MPEG2
4:2:2 Profile @ Main Level intra-frame only encoding. It is
possible to select the bit rate as 50, 40, or 30 Mbps by a menu
operation.
Installing this board requires an upgrade to the DSR-2000/
2000P. For details, consult your Sony service representative.
..........................................................................................................................
1) SDTI-CP (SDTI Content Package) is based on the SDTI (Serial Data
16
Transport Interface) format (SMPTE 305M), and is an MPEG signal
transport format (SMPTE 326M) for content package transfer of
MPEG-ES and so forth, using data stream multiplexing.
1)