Clearing Paired Devices; Putting On The Headphones - Silvercrest SBK 4.1 B2 Bedienungs- Und Sicherheitshinweise

Activate multipoint mode by pressing and holding
for 2 seconds. Acoustic signal sounds. The first communication
device (mobile phone or computer) is disconnected.
Now connect to the second communication device via Bluetooth
with the headphones. Please refer to the notes in the instructions for
your communication device. Select the entry "SBK 4.1 B2" from
the list of devices detected by your computer or mobile. the second
communication device is connected.
Briefly press
communication device is connected again. Now, both communica-
tion devices are connected to the headphones simultaneously.

Clearing paired devices

In paired mode (the LED will briefly flash blue twice every 3 seconds),
press and hold
The headphones is now in pairing mode. The LED
and blue.
Simultaneously pressing and holding
for approx. 2 seconds and two beeps sound.
The memory in the headphones is cleared and it will not auto-con-
nected to the previous paired communication device while off and
on the headphones again.

Putting on the headphones

The headphones can be adjusted to your head size, if necessary:
the speakers
2
purpose. Adjust these to ensure optimal comfort.
button and long acoustic signal sounds. the first
6
button for 2 seconds and acoustic signal sounds.
6
are secured to the band
button
flashes red
5
button and
6
with a metal rail for this
3
6
®
button
4
GB/CY 15