Led Indicators - Dell PowerEdge 15FP Bedienungsanleitung

Ta b l e 1 - 6 .
Color temp:
User:
Exit:
Sharpness:
1024 x 768:
59.8 HZ:
VER 0.05MH:
Other features:
Intellectual-Auto:
VESA DPMS
Functionality:
Ta b l e 1 - 7 .
Mode
On
Stand-by
Suspend
Off
Button power off
Cable disconnection
1-10
U se r 's Guide
O S D D e s c r i p t i o n
Color temperature for standard 9300, 6500 or user defined.
User R: Red signal gain by user defined.
User G: Green signal gain by user defined.
User B: Blue signal gain by user defined.
6500: Set CIE coordinate at 6500°K color temperature.
9300: Set CIE coordinate at 9300°K color temperature.
Exit OSD menu function.
Adjust the scale-up effect (smoother or sharper).
OSD transparency: Adjust transparency level from OSD menu. The range
is from 0 to 100 scales.
Current mode resolution.
Current mode vertical frequency ±1 Hz.
Firmware revision.
The auto-adjustment function starts automatically when a display mode is
input for the first time. After adjustment, this mode is saved. The monitor
switches to the optimized condition automatically whenever this mode is
encountered again. A total of 21 recently used modes are recorded into
this system.
When signaled by the host system, the monitor displays a black screen for
about 3 seconds. After 3 seconds, if the monitor receives no further signal,
it will display "No Signal" and then enter the power saving mode.
L E D I n d i c a t o r s
LED color
Full bright < blue >
Half bright < blue >
Half bright < blue >
Dark
Dark
1. Half bright < blue > <Sleep mode>
2. Dark <DC power off; Off mode>
( c o n t i n u e d )