Herunterladen Inhalt Inhalt Diese Seite drucken

Material Damage; Unpacking And Setting Up - Silvercrest SDG 800 B2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SDG 800 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 107
RP42772-Dampfgarer LB3 Seite 7 Mittwoch, 9. Oktober 2013 10:58 10

4.7 Material damage

Warning! Follow the instructions below to
prevent material damage.
• Never operate the steamer without
water.
• Ensure that there is never too much or
too little water in the appliance. Read off
the water level on the water level
indicator 13. It should always be
between MAX (1.2 l) and MIN (0.2 l).
• Only place the appliance on a level,
dry, non-slip surface so that the
As
the
Note:
generator 11 are supplied lightly greased,
a little odour and smoke may develop
when the appliance is used for the first time.
This will not cause any damage and will
stop after a short time. Please ensure
adequate ventilation during this process.
1. Remove the individual parts from the
packaging.
2. Check that the individual parts are
complete (see "1.2 Scope of supply" on
page 3) and are undamaged.
3. Clean the appliance thoroughly before
using
it
for
"10. Cleaning
page 16).
4. Place the appliance on a level, dry, non-
slip surface so that the appliance can
neither fall over nor slide off.
5. Pour 0.25 l of clean drinking water into
bottom part 12.
6. Put
steam
sleeve
generator 11. The narrow end of steam
sleeve 8 must face upwards.
7. Put collector 7 in bottom part 12.
SDG 800 B2

5. Unpacking and setting up

appliance/the
steam
the first
time
(see
and
storing"
on
8
on
steam
appliance can neither fall over nor slide
off.
• Do not place the appliance immediately
underneath a suspended cupboard, as
steam escapes upwards and might
damage the furniture.
• Do not place the appliance on a hot
cooking ring.
• The appliance and accessories may not
be put in a microwave oven.
• Use only clean drinking water to
generate steam.
8. Place steamer baskets 5 on bottom
part 12:
– ensure that the steamer baskets are in
the right sequence, as they are slightly
different sizes. Steamer basket 1 is
always on the bottom, steamer basket
2 on top of it and steamer basket 3
right on top. The number of the
steamer basket is shown on its
handles.
9. Place rice tray 4 in the top steamer
basket.
10.Place lid 3 on the top steamer basket.
11. Insert the power supply plug in a
suitable earthed power supply socket
(see "3. Technical data" on page 4).
12. Select a cooking time of 5 - 10 min. on
time selector 14.
The appliance starts heating up and
operating display 15 comes on.
13.Allow the appliance to cool down once
the set time has elapsed and then clean
it again (see "10. Cleaning and storing"
on page 16).
The appliance is now ready to use.
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis