Herunterladen Inhalt Inhalt Diese Seite drucken

Blaupunkt EHB608 Bedienungsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
EHB608/EHB810
CAUTION:
When driving for the first time, drive the electric
hoverboard with the support of another person to
prevent from falling down or losing a balance.
Steering elements
Function indicator A
Hoverboard housing
LED Lights
Speaker
On/Off button
Pedal sensors
The electric hoverboard is equipped with four sensors underneath each foot pedal, that help to
automatically balance the hoverboard while entering on.
• Do not go beyond the edge of the pedals, note that your foot should be on the pedal while driving.
• Do not place any baggage on the pedal, the sensor will detect weight and hold the hoverboard in
on mode. This increases the likelihood of a collision, causing injury to the driver or damage to the
hoverboard.
Function indicator
The function indicator is located in the middle of the electric hoverboard and is used to display
current information.
• A The LED display shows the battery-charge level. When the indicator light is green for the EHB810
model, or blue for the EHB608 model, the device battery-charge level is sufficient. When the
indicator turns red for the EHB810 model and the blue indicator starts flashing for the EHB608
model, and a sound signal is heard in the case of both models, begin charging the board as soon as
possible. Before each use, check the current battery-charge level to make sure that the board has
enough power for the return journey. The board can be charged after each use.
On both models, when the battery level is less than 15%, the LED indicator will begin flashing, and a
sound signal will be heard.
• B The current-information display area: when the rider is standing on the pedals and the sensors are
activated, the signal light will show up blue for the EHB608 model or green for the EHB810,
indicating that the board is in working mode. If there is any system error, the signal light on the
EHB810 model will turn red and the blue light on the EHB608 will begin to flash. A sound signal will
also be heard, on both models.
Function indicator B
6
Anti slip pedal
Tyre
Power supply socket

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ehb810

Inhaltsverzeichnis