14 GB
91033_silv_Heizkoerperthermostat_Content_HU-CZ-SK.indd 14
The display of „INS" with the rotating
shows that the motor is still travelling back.
As soon as „INS" is displayed, the pro-
grammable radiator control unit can be
installed on the valve.
The weekly program and other settings
can be adjusted before installation. Press
the MODE key
shown in the display. You can find more
details under „Configuration menu".
After the programming has been com-
pleted, „INS" is shown again in the dis-
play and installation can take place.
Installation on the radiator
The installation of the programmable radiator
control unit is easy and can be performed
without discharging the heating water or inter-
fering with the heating system. Special tools or
switching off the heating are not required. The
for this, while „INS" is
7
09.07.13 11:07