Inserting Negatives - Silvercrest SND 3600 B1 Bedienungsanleitung Und Serviceinformationen

2. First move the slider as far as possible to the right and then gently move it
completely to the left. A slide is now inserted into the digitizer. Repeat the
process
The slide which is currently in the digitizer is moved to the side and
ejected.
 To record the slides, please read the section "Digitizing negatives/slides".
 Remove the rapid slide feeder after you have recorded your slides. Remove
the last slide from the rapid slide feeder.

Inserting negatives

 Open the negative holder at the point marked "OPEN". Then place the
negatives in the device as shown in the following image. Make sure that the
negatives are not inserted the wrong way around or upside down. In this
case, you can refer to the numbering on the negative strip. The perforations
of the film strip must engage in the corresponding retaining pins in the
negative holder.
to insert another
SilverCrest SND 3600 B1
slide into the digitizer.
English - 13