Overload Indication - Hama Selina Bedienungsanleitung

TO CONVERT WEIGHT UNIT
If the scale is with both measuring system of Metric (kilograms) and Imperial (pounds, stones), you can convert weight unit as
following:
Unit switch
Battery
Cover
Unit switch

OVERLOAD INDICATION

LOW BATTERY INDICATION
RE-TEST
ADVISE FOR USE & CARE
1. The glass platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. DO NOT strike, shock or drop the scale.
4. Treat the scale with care as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or battery power is low. Insert or replace new battery.
9. If there is error on display or cannot turn off the scale for a long time, please take off the battery for about 3 seconds, then install it
again to remove soft-fault. If you cannot resolve the problem, please contact your dealer for consultation.
10. Do not use it for commercial purpose.
Condition 1:
if the unit switch is inside battery case,
A. Open battery case cover on the back of scale.
B. Pull up and down the unit switch to convert scale unit between kg-lb-st.
Condition 2:
if the unit switch is on the back of the scale,
A. Find unit switch on the back of scale.
B. Pull up and down the unit switch to convert scale unit between kg-lb-st.
Scale overload. (max. weight capacity is indicated on the scale).
Please step off to avoid damage.
Battery power is low. Please install new battery.
Display " " when you step off the scale, means this weight reading with error. Please re-test.
9