System Pin; Time; Set Alarm - Silvercrest SDT 1.7 A1 Bedienungsanleitung Und Serviceinformationen

System PIN

To change the PIN code of your phone, proceed as follows:

After confirming by pressing the Phonebook button [3] the message "Old PIN" appears
on the display [2].

Enter the phone's old PIN code (default 0000) and press the Phonebook button [3] to
confirm.

"New PIN" will appear on the display [2]. Enter a new PIN code for your phone and
press the Phonebook button [3] to confirm.

"Again" will appear on the display [2]. Enter the new PIN code again and press the
Phonebook button [3] to confirm.

A confirmation beep will sound and the "System PIN Changed" message will appear for
a few seconds on the display [2].

Please make sure you remember the System PIN or keep it in a safe place.
In case that you have lost your PIN, please contact our Service Hotline (see page 189).

Time

This menu lets you set alarm and the date and time as well as the clock format. Proceed as follows
to open this menu:

While the handset is in standby mode, press the Menu button [12] to show the menu.

Press the  or  buttons on the directional control [4] to select the "Time" menu.

Press the Phonebook button [3] to confirm your selection.

Press  or  on the directional control [4] to select the desired menu item and then
press the Phonebook button [3] to confirm.

Set Alarm

For each alarm (Once, Every Day, Mon – Fr) you can set the time and the melody. To disable the
alarm, select "Off".

Input the time via the numeric buttons [6]. Press the Phonebook button [3] to save.

Select a melody. Press the Phonebook button [3] to save.

An alarm icon appears on the display [2] while the alarm is enabled.
The handset will play the selected melody at the time of the set alarm. Press the Menu
button [12] to stop the alarm sound. Press the Phonebook button [3] for snooze. After
approx. 5 minutes the melody will play.
SilverCrest SDT 1.7 A1
English - 177