Checking The Battery Charge Level; Maintenance And Storage; Cleaning - Parkside PAPP 20 B2 Bedienungs- Und Sicherheitshinweise

Checking the battery charge level

Press the battery charge level button
battery (see also fig. A). The status/remaining charge will be
shown on the battery display LED
- 3 red LED glow up = maximum charge
- 2 red LED glow up = medium charge
- 1 red LED glows up = low charge – charge the battery

Maintenance and storage

If you do not intend to use the battery for an extended period,
remove it from the appliance and store it in a clean, dry place out
of direct sunlight.
If a lithium-ion battery is to be stored for an extended period, the
charge level should be checked regularly. The optimum charge
level is between 50% and 80%. The optimum storage environment
is cool and dry.
Never try to repair damaged batteries. Maintenance of batteries
should only be carried out by the manufacturer or an approved
customer service centre.

Cleaning

Clean out dust and debris from charger vent and electrical
contacts using a soft brush.
Use only mild soap and a damp cloth to clean the battery pack
and charger, keeping away from all electrical contacts. Certain
cleaning agents and solvents are harmful to plastics and other
insulated parts.
Never use flammable or combustible solvents around battery
packs, charger, or tools.
to check the status of the
2
as follows:
3
GB/IE 19