Technical Data - Bosch GTD 1 Professional Originalbetriebsanleitung

OBJ_BUCH-1216-001.book Page 10 Friday, April 16, 2010 2:08 PM
10 | English
Tile Table GTD 1
en
Safety Notes
Read all warnings and instructions
provided with the tile table. Failure
to follow the warnings and instruc-
tions may result in serious injury.
Place the tile table on a firm, level and hor-
izontal surface. Secure the tile table with
screws or clamps. If the tile table can slip off
or wobbles, the power tool cannot be uni-
formly and securely guided.
Do not overload the tile table and do not
use it as a seat. Overloading or standing on
the tile table can lead to the upward shifting
of the centre of gravity of the tile table and its
tipping over.
Only clamp dry tiles in the tile table. Wet or
moist tiles can slip and lead to loss of control
over the power tool.
Affix the tile on the tile table before begin-
ning to work it. A workpiece affixed with
clamping devices is held more secure than by
hand.
Keep your workplace clean. Objects that
come into contact with a rotating router bit
can hit the operator with high speed.
Do not keep combustible materials close to
your workplace. When working tiles, hot ma-
terial chips develop, which could start a fire.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of these devices can reduce dust
related hazards.
Keep bystanders a safe distance away from
work area. Anyone entering the work area
must wear personal protective equipment.
Fragments of workpiece or of a broken ac-
cessory may fly away and cause injury be-
yond immediate area of operation.
2 610 009 624 | (16.4.10)
Symbols
The following symbols can be important for the
operation of your power tool. Please memorise
the symbols and their meanings. The correct in-
terpretation of the symbols helps you operate
the power tool better and more secure.
Symbol Meaning
Wear safety goggles.
Wear ear protectors. Expo-
sure to noise can cause hear-
ing loss.
Wear a dust respirator.
Intended Use
The tile table is intended for affixing tiles to en-
sure their safe processing.

Technical Data

Tile Table
Article number
Weight
Max. carrying capacity
Maintenance and Service
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the tile table.
GTD 1
Professional
3 601 F0C Z..
kg 3.5
kg 136
Bosch Power Tools