Getting Started; Packing List - Yamaha PDM-4220 Aufstellungsanweisungen

Thank you for purchasing the Pedestal.
To ensure correct usage, please read this instruction manual thoroughly. After reading,
please store this manual in a safe place for future reference.
This pedestal is for use only with the following model:
PDM-4220
■ Request an installation specialist to install this unit.
■ YAMAHA assumes absolutely no responsibility for injuries and damages that may
occur due to the improper installation and handling.

Getting Started

● Installing the Pedestal requires a high level of precision. Be sure to have your retailer install it properly, with full
attention to safety.
● This Installation Instructions provides important precautions for preventing accidents, and describes how to
assemble and install the Pedestal. Please read and understand this Installation Instructions and the Installation
Instructions of your plasma display monitor before use.
● After you have read this manual, keep it in a safe place.
■
Note to Retailers
Installing the Pedestal requires a high level of precision. Please perform the assembly and
installation after thoroughly reading these instructions. We bear no liability for accidents or injuries due to
faulty assembly or installation. After performing the assembly and installation, please give this manual to
the customer.

Packing List

Pedestal
Before assembly, please make sure all the items in the packing list are present.
If any items are missing, please contact your retailer.
Accessory parts in the parts packing bag
M6 x 30 screws
( x 4 )
1
Wire clamps
( x 2 )