Specifications - Philips Amara View minimal contact full-face mask Gebrauchsanweisung

Philips Respironics System One Resistance Control
Your mask when combined with a Philips Respironics System One device, provides
optimal resistance compensation. This mask value is X1 and should be set by your
provider. Notes:
• Compare the mask to the device. See your device manual if the values do not
match.
• System One is not compatible with masks that use a separate exhalation device.

Specifications

Warning: The technical specifications of the mask are provided for your
healthcare professional to determine if it is compatible with your CPAP or bi-level
therapy device. If used outside these specifications, or if used with incompatible
devices, the mask may be uncomfortable, the seal of the mask may not be
effective, optimum therapy may not be achieved, disconnect alarms may not be
detected, and leak, or variation in the rate of leak, may affect device function.
Pressure Flow Curve
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0
0
Resistance with Anti-Asphyxia Valve Closed to Atmosphere
Drop in Pressure at
All sizes
5 10
Pressure cm H
50 SLPM
1.5 cm H O
2
15 20
O
2
100 SLPM
3.9 cm H O
2
7
25 30