Hama PA-506 Bedienungsanleitung Seite 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
»PA-506« Stereo Audio Preamplifier to connect record
players with magnetic pick-up systems to high-level
inputs. Record players are no longer compatible with
many of the new stereo amplifiers. The »PA-506«
preamplifier also allows the use of normal high-level
inputs (LINE, AUX, CD, Tuner, Tape, etc.) as an extra
record player input. Moreover, the »PA-506« enables
the connection of a record player to a PC sound card.
The»PA-506« features built-in RIAA equalisation.
1. Explanation of Warning Symbols and Notes
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Stereo-phono Preamplifier
• power supply, 230 V, 500 mA
• RCA cable, 2 plugs – 2 plugs
• These operating instructions
3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to
any major shocks.
• Do not operate the product outside the power
limits given in the specifications.
• Do not open the device or continue to operate it if
it becomes damaged.
• Connect the product only to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Dispose of packaging material immediately
according to locally applicable regulations.
2
• Do not modify the device in any way. Doing so
voids the warranty.
• As with all electrical devices, this device should be
kept out of the reach of children.
4. Operation
• Connect the left and right channel of the record
player with the corresponding left and right
channel of the preamplifier input (MM/Input).
• Check that the record player has a magnetic pick-
up. Any separate chassis earthing cable on the
record player must be connected to the additional
screw at the back of the device.
• Connect the left and right channel of the
preamplifier output with the corresponding left
and right channel of the stereo amplifier input
(LINE, AUX, CD, Tuner, Tape, etc.).
• Then connect the »PA-506« preamplifier to
power supply. The record player and amplifier can
now be used in the customary manner. Please
check that the correct input on the stereo amplifier
has been selected.
Note
Ensure correct polarity when using a plug-in
mains adapter, otherwise the device could be
damaged.
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com