Saddle Position/ Height - Blaupunkt CLARA 390 Bedienungsanleitung

9. SADDLE POSITION/ SADDLE HEIGHT
A properly adjusted saddle can minimize discomfort on the bike and make your pedaling more
efficient. Take some time to get the correct saddle position as it will improve your overall riding
experience. Saddles can be adjusted in three ways: saddle height, forward/ backward position and
tilt.
Open the quick-release clamp on the seat post.
The saddle height controls the leverage for your pedaling. Too low and it puts stress on your knees,
too high and you may rub the saddle excessively. There are a number of ways to get the right saddle
height. A good way of doing it is to sit on the bike with both feet on the pedals – get help from
second person not to fall. Place your pedals in the 6 o'clock and 12 o'clock position. Your bottom leg
should be fully extended when the heel is placed on the lower pedal. If it's angled you need to raise
the saddle. If you can't reach the pedal with heel, then lower the saddle.
You can change the saddle angle and the front/ rear position by loosening the Allen screw (1) and
adjusting the saddle to your convenience. Tighten the Allen screw again when you have adjusted
the correct position.
SAFETY NOTE: The seat post has a MAX marked line (that is the safety line), this is the MAX height that you
can raise the saddle. In any cases of adjustment, the MAX marked line should always below the seat post
clamp. Serious injury may be caused to the rider if the saddle height is raised beyond the MAX line.