Sharp FZ-40SEF Bedienungsanleitung Seite 5

2 Remove the stamina-
power carbon from the
polyvinyl bag and install
it in the main unit.
Make sure the tabs on the HEPA filter
remain visible.
3 Install the pre-filter
Insert the 4 tabs on the pre-filter holes
of the main unit.
Fill in the usage start date
4
of the filters on the date
label included with the
replacement filters.
Affix the label on top of
the replacement label that
is already on the back of
the front panel.
3
After replacing the filters
Be sure to press the Reset button on
the remote control with the power
plug inserted in the wall outlet.
A short beep will be heard and the
operation hours stored in the memory
will be reset.
If the filter replacement lamp is on,
the lamp will turn off.
All manuals and user guides at all-guides.com
5
Stamina-power carbon
Back of front panel
Replacement label
Receiver
RESET
Plasmacluster
AUTO OFF
Transmitter