Tightening Torque; Daily Maintenance - Husqvarna PP 325 E Bedienungsanweisung

Hydraulic oil filter
The filter should be replaced twice a year.
• Lay the power pack down with the filter housing facing
upwards.
• Remove the cover of the filter housing by removing the
three screws.
• Lift up the filter element.
• Push the new filter in place over the sleeve coupling in the
bottom of the filter housing.
• Mount the filter housing cover.

Tightening torque

When performing repair and maintenance work that include
demounting and subsequent mounting and tightening of
screws, the following torque should be used:
• M6: 10 Nm
• M8: 25 Nm
• M10: 50 Nm

Daily maintenance

Regularly check:
• The hydraulic oil level in the hydraulic power unit, to make
sure it lies between the marks on the sight gauge.
• Check the tyre pressures.
• Any abnormal noises.
12 –
English
MAINTENANCE