Learn In A Lampcam - Blaupunkt WiFi LampCam HOS-X20 Bedienungsanleitung

4. Usability of LampCam and APP

4.1. Learn in a LampCam:

Step 1:
Download and install the "OMGuard HD" APP
to your smartphone.
Step 2:
Take your smartphone, go to your Wi-Fi settings and select the new Wi-Fi Network starting
with HD (example HD-15584) to connect to it. This network is a Wi-Fi created by the
LampCam to enable the setup procedure.
Step 3:
Enter the LampCam Wi-Fi default password 12345678 and save the settings to connect.
You will not have internet connection, but you will be able to continue the LampCam setup
procedure.
Step 4:
Now start the OMGuardHD App and tap the "add camera"
Step 5:
At "System Name" type any desired name for your LampCam. E.g. "Front door"
Step 6:
Tap "Scan DID label" for Android) or
the QR icon (for iOS) and scan the QR
code label located at the back of the
LampCam.
At Security code enter the default
Step 7:
Security Code 123456.
Step 8:
Tap "Save".
4.2. Wi-Fi settings:
Step 1:
On the LampCam menu tap the config LampCam icon
from the desired LampCam. Then tap the "Advanced" button
Step 2:
Enter the "Admin password" (default 123456).
Step 3:
For security reasons the APP will request to modify the default Admin password.
(The Admin password will be used to access the settings menu and to arm / disarm the
LampCam). We recommend to write down this password in a safe place. Otherwise if you
forget it you would need to factory reset the camera.
Step 4:
Scroll down to Wi-Fi settings and tap "Manage Wi-Fi network"
Step 5:
Select your home Wi-Fi Access Point from the scroll down menu and input your Wi-Fi
password. Then tap "OK"
Step 6:
The LampCam will be offline for around 60 seconds while rebooting. When the LampCam
connects to the Wi-Fi router correctly, the blue Network Indicator LED will be turned ON
permanently. From now on, you can remotely access to the LampCam at any time and
from any place.
8
5
Front door
7
6
and tap the settings icon
For iOS
and Android
button.
8