LG PQRCUSA0 Bedienungsanleitung Seite 37

Function Setting : Mode Change Temp
This function is to set converting temp. of Auto Changeover
6 Press button to complete and active
the setting process. (Airflow direction
function will be released whenever
setting vane angle)
7 Press button to exit or
system will automatically release
without any input after 25
seconds.
1 Press button.
2 Repeat pressing
icon flash.
Ex) Setting ACO Temp as '3'.
3 Press button to change
converting temp value : 1~7
4 Press button to complete
and active the setting process.
5
Press button to exit or
system will automatically
release without any input after
25 seconds.
Owner's & Installation Manual 37
Owner's instruction
button until