Sony UPA-D3 Gebrauchsanweisung Seite 10

Connections (continued)
Ethernet connecting cable
to wall outlet
a) BLACK BOX EVNSL01-003, etc.
b) Connect to either of the two connectors according to the network.
c) TOTAL TECHNOLOGIES, LTD. SCSI-C52A-05, etc.
d) Terminate the last printer connected to the SCSI bus, by connecting the terminator to the free connector. If the
printer is provided with the internal terminator, set it to ON.
For details, refer to the instruction manuals supplied with the printers.
10 Preparation
Modality
a)
to NETWORK 10 BASE-T or 10 BASE-5
SERIAL SCSI
AC IN
NETWORK 10BASE-5
NETWORK
10BASE-5
to SCSI
to AC IN
connector
Power cord
c)
SCSI cable
(not supplied)
to SCSI connector
to SCSI connector
to SCSI connector
Terminator or built-in terminator
Modality
Ethernet line (10 BASE-T or 10 BASE-5)
b)
UPA-D3
to SCSI connector
to SCSI connector
d)
Last printer
d)