Operating Modes - Bosch BLR 10 Bedienungsanleitung

When one of the buttons on the remote
control is pressed, the operating indicator 3
shows that the signal is being sent. When
the signal reaches the construction laser, a
signal tone sound on the construction laser
as confirmation.
The construction laser can only be
switched on and off with the on/off switch
on the unit itself (see the operating instruc-
tions of the construction laser).

Operating Modes

Buttons for Line and Rotation
Operation
The functions of the buttons for rotation op-
eration 7 and line operation 8 on the remote
control are not different from the functions
of the corresponding buttons on the con-
struction laser. For details, please refer to
the operating instructions of your construc-
tion laser.
Example: With a single pressing of the but-
ton for rotation operation, the construction
laser starts rotating with the highest rota-
tional speed. This takes place regardless of
whether the button on the construction la-
ser or the button for rotational operation 7
on the remote control is pressed.
1 609 929 F28
English–4
(03.08) T