Assembling The Trimmer - Toro 51466 Bedienungsanleitung

1. Warning—read the Operator's Manual.
2. Cutting hazard of hand or foot—stay away from moving parts. Keep bystanders away.
3. Thrown object hazard—wear eye protection.
4. Warning—contains lead; do not discard.
Setup

Assembling the Trimmer

1. Insert the cable connecting the two trimmer
halves into the black center section.
Note: Ensure that the cable is not twisted.
2. Connect the black center section to the motor
housing.
3
105-6939
3. Install the upper handle, as shown, using the long
bolt and finger nut.
Note: You can adjust the upper handle to a position
that is comfortable and balanced for you.
m–5769
3327–488
m-6310