Grundig GBP 7000 3D Bedienungsanleitung Seite 17

INITIAL SETUP
– Display: "» « Connection to (WLAN
network name), Verifying Internet
Connection..." appears.
– Display: » «, if the connection is success-
ful.
8
Press »SETUP« to return to the main menu.
Note:
For the »IP Settings« and »Network test« set-
7
tings, see "Network settings by using wired
connection" section.
Manual settings in wireless
connection
1
At step 4 in "Network settings by using wireless
connection" section, select »Manual« by using
»A« or »S« and press »ENTER« to confirm.
– Manual setting menu opens.
2
Select »Encryption« by using »A« or »S«
and press »ENTER« to confirm.
3 Select the encryption from your wireless net-
work by using »A« or »S« and press
»ENTER« to confirm.
4 Select »Name« by using »A« or »S« and
press »ENTER« to confirm.
– The keyboard appears.
----------------------------------------------------------------------------------------------------------------------
5
6
7
8
9
IP Settings
Please refer to "Network settings by using wired
connection".
Select the first character of the network name
(capital and small letters, numbers, symbols)
by pressing »A«, »S«, »a« or »s« and
confirm by pressing »ENTER«.
Repeat the procedure for all characters.
After you finish entering all characters, select
the push button »OK« on the keyboard by
pressing »A«, »S«, »a« or »s« and press
»ENTER« to confirm.
Notes:
You can choose between numbers, lower
7
and upper case letters, and special charac-
ters by using the push buttons » « and » «
in the keyboard.
If you make a mistake during entry, press
7
»A«, »S«, »a« or »s« to select the
push button » « and press »ENTER« to
confirm. The last character is deleted.
Select »Password« by using »A« or »S«
and press »ENTER« to confirm.
– The keyboard appears.
Select the first character of the password
(capital and small letters, numbers, symbols)
by pressing »A«, »S«, »a« or »s« and
confirm by pressing »ENTER«. Repeat the pro-
cedure for all characters.
After you finish entering all characters, select
the push button »OK« on the keyboard by
pressing »A«, »S«, »a« or »s« and press
»ENTER« to confirm.
Select »Connect« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
– Display: "» « Connection to (WLAN
network name), Verifying Internet
Connection..." appears.
– Display: » «, if the connection is success-
ful.
Press »SETUP« to return to the main menu.
17
ENGLISH