Product Description And Specifications - Bosch PMF 250 CES Originalbetriebsanleitung

16 | English
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. nails, clamps). It is also suit-
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) AutoClic lever for unlocking tools
(2) On/off switch
(3) Orbital stroke rate preselection thumbwheel
(4) Ventilation slots
(5) Handle (insulated gripping surface)
(6) Thread for auxiliary handle
(7) Tool holder
A)
(8) Plunge cut saw blade
A)
(9) Sanding plate
A)
(10) Sanding sheet
A)
(11) Depth stop
A)
(12) Segment saw blade
A)
(13) Dust extraction hose
A)
(14) Dust extraction outlet
A)
(15) Dust extraction system
(16) Clamping lever for dust extraction system
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Multifunction tool
Article number
Orbital stroke rate
preselection
Constant electronic control
1 609 92A 4K5 | (11.10.2018)
Multifunction tool
Soft start
AutoClic tool holder
Rated power input
Power output
No-load speed n
Oscillation angle on left/
right
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 84 dB(A); sound power level
95 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Working without the Auxiliary Handle
Total vibration values a
determined according to EN 62841‑2‑4 (Sanding),
EN 62841‑2‑11 (Cutting):
Sanding: a =10 m/s
h
Cutting with plunge cut saw blade: a
Cutting with segmential saw blade: a
Scraping: a =12 m/s
h
Working with the auxiliary handle
Total vibration values a
determined according to EN 62841‑2‑4 (Sanding),
EN 62841‑2‑11 (Cutting):
Sanding: a =9 m/s
h
Cutting with plunge cut saw blade: a
Cutting with segmential saw blade: a
Scraping: a =16 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
A)
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
PMF 250 CES
increase the vibration and noise emissions over the total
working period.
3 603 A02 1..
To estimate vibration and noise emissions accurately, the
●
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
●
PMF 250 CES
W
W
−1
min 15000–20000
0
°
kg
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2
=13 m/s , K=2 m/s
h
2
=14 m/s , K=3 m/s
h
2 2
, K=1.5 m/s .
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2
=17 m/s , K=2 m/s
h
2
=18.5 m/s , K=3 m/s
h
2 2
, K=1.5 m/s .
Bosch Power Tools
●
●
250
130
1.4
1.2
/ II
2
,
2
,
2
,
2
,