Troubleshooting - ABB Busch-Wächter Professional 220 EIB 6178 AGM-204-500 Betriebsanleitung

Troubleshooting

Trouble
General
Watchdog
detection
fails
Cause/Remedy
– Check and, if necessary, change
the position of the rotary buttons
selecting operating mode, response
threshold and cutout delay
– Check whether controlled EIB
installation systems operate
correctly
– Check whether controlled EIB
devices or the watchdog is defect
Attempt to replace devices/watchdog
and reset the equipment during a
trial operation
• Lens dirty
– Clean lens with a wet cloth
• Switching brightness in a bright
environment or in the event of
scattered light wrongly adjusted
– Turn rotary button towards the
"Moon" setting
• Check connections
GB
>>>