Herunterladen Inhalt Inhalt Diese Seite drucken

Zanussi ZWT 71401 WA Benutzerinformation Seite 8

Vorschau ausblenden Andere Handbücher für ZWT 71401 WA:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses in some
programmes. On cotton programmes the maxi-
mum spin speed is reduced automatically.
Start Pause
This button allows you to start or to interrupt
the selected programme.
Door locked pilot light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can be
opened:
Display
The display shows the following information:
7.1: Child safety lock
This device permits you to leave the appliance
unattended during it's functioning (see «Child
Safety Lock» paragraph).
7.2:
• Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example
2.05). The duration is calculated automatical-
ly on the basis of the maximum recommen-
ded load for each type of fabric. After the
programme has started, the time remaining is
updated every minute.
• Selected drying time
After selecting a drying programme, the dry-
ing time is displayed in minutes or in hours
and minutes (e.g. 130 mins = 2.10). After the
programme has started the time remaining is
updated every minute.
• Delayed start
8
• light on: the door cannot be opened. The
machine in working or has stopped with wa-
ter left in the tub.
• light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
• light flashing: the door is opening.
Delay Start
The programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours by means of this but-
ton.
7.1
7.2
The Selected delay set by pressing the rele-
vant button appears on the display for few
seconds, then the duration of the selected
programme is displayed again.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
E20 (see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with the
set wash programme is selected, the mes-
sage Err is displayed at the bottom of the
display for a few seconds and the integrated
red light of button 8 start flashing.
• End of programme
When the programme has finished three
flashing zeros are displayed, the pilot light 9
and the pilot light of button 8 go out and the
door can be opened.
www.zanussi.com

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis