Nfc-Enabled Smart Device - Medion LIFE E64058 Bedienungsanleitung

9.1. NFC-enabled smart device

The NFC function (Near Field Communication) enables the wireless reception
of close-range audio signals from an NFC-enabled audio output device.
1. Switch the sound bar on by pressing the
the remote control.
2. Then press the Source button on the sound bar or the BT button on the
remote control until the power light turns blue and flashes slowly.
1. Switch on the NFC function and Bluetooth function on your smart device.
The device is in search mode.
2. Hold your NFC-enabled smartphone in the immediate vicinity of the
sound bar over the zone marked
3. When asked to respond to the prompt Connect to MD 80022, press Yes
to confirm. Wait 5 to 8 seconds until you have moved your smart device
away from the loudspeaker.
The pairing process is complete when you hear the message PAIRED and
the power light turns blue.
4. Select a medium volume level and start playback on your smart device.
5. To disconnect the devices, hold your smart device over the marked zone
again until you hear the message DISCONNECTED.
98 of 104
button on the product or on
2
.