Philips WelcomeEye Connect Anleitung Seite 47

7. USER MANUAL
Response to a call:
- Pressing the intercom panel button triggers an audible signal and the monitor turns on.
You have up to 20 seconds to respond to the call. Once the visitor has been identi ed,
press the key to begin talking.
- After two minutes of conversation, communication stops and the screen returns to the
home page. If the conversation ends before two minutes, press the key to stop
communication. The screen returns to the home page.
- To refresh the picture, press on the home screen. To refresh for an additional 120
seconds of conversation, press the key
- Control an electric lock or strike plate by pressing the key
- Control an automatic gate opening mechanism by pressing the key
Missed call:
- Pressing the intercom panel button triggers an audible signal and the monitor turns on.
If the visit memory function is activated (photo or video), a screenshot of the visitor is
automatically sent to the user.
- If you choose to take photos, the number of images are captured corresponds with the
number of photos you have selected (1, 3 or 5). These photos are stored in the internal
memory if no micro SD card is inserted. Otherwise they are stored on the micro SD card.
Note:
the photos saved in the internal memory may not be copied onto a memory card.
- You can also choose the video recording. In this case a video with sound is recorded. This
function requires a micro SD card. Videos will only be recorded on your micro SD card. The
recording time can be adjusted (10, 20 or 30 seconds).
- When there is a recorded message (visitor screenshot or message), a red circle with a
gure indicates the number of unread messages on the home screen.
- For the WelcomeEye Connect version, an answering system function is available. If the
answering system function is activated, the recorded message of the answering system
is played on the intercom panel. At the end of the message, the system automatically
switches to video and audio recording mode. The visitor can therefore leave a message.
Note: the answering system function is only possible if the video recording is activated.
Standby
- The screen is automatically placed on standby which means the screen enters sleep
mode for energy saving and screen sustainability purposes.
- If the monitor is in a menu other than the main menu, it automatically switches to the
main screen after 15 seconds of inactivity.
- If the monitor is in the main menu, it automatically switches to standby mode after 15
seconds of inactivity.
GB14
WelcomeEye Connect / Touch / 11/17