Electrolux EDBS3350 Gebrauchsanweisung Seite 9

FABRIC
Denim
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the
table!
TROUBLESHOOTING
PROBLEM
Soleplate is not heating even
though iron is turned on.
Iron does not produce steam.
Steam jet and vertical steam
jet function does not work.
Water leaks from the soleplate
during ironing.
Flakes and impurities come
out of the soleplate during
ironing.
Water leaks from the soleplate
while the iron is cooling down
or after it has been stored.
Brown streaks come out of the
soleplate while ironing and
stain the linen.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an Electrolux service center
that can remove and recycle the battery and electric parts in a safe and professional way. Follow your
country's rules for the separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information and specifications without notice.
www.electrolux.com
TEMPERATURE SETTING
to "MAX"
POSSIBLE CAUSE
Connection problem
Temperature control is in MIN
position.
Not enough water in tank.
Steam control is selected in non-
steam position.
Selected temperature is lower than
that specified to use with steam.
Steam jet function was used very
frequently within a short period.
Iron is not hot enough.
The iron is not hot enough.
You have used hard water, which has
caused scale flakes to develop in the
water tank.
The iron has been put in horizontal
position while there is still water in
the water tank.
You have used chemical descaling
agents.
Fabric fibres have accumulated in
the holes of the soleplate and are
burning.
Fabrics might not be properly rinsed
or the garments are new and have
not been washed before ironing.
IRONING RECOMMENDATION
Use maximum steam.
SOLUTION
Check main power supply cable, plug and
outlet.
Select adequate temperature.
Fill water tank (see "Getting started", no 2).
Set steam control between positions of
minimum steam and maximum steam (see
"Ironing chart").
Increase temperature to at least
Put iron on horizontal position and wait
before using steam jet function.
Adjust the proper temperature to steam
ironing (up to
position and wait until temperature
indicator light turns off.
Set the temperature dial to a temperature
( to maximum) suitable for steam
ironing. Put the iron on its heel and wait
until the light has gone out before you start
ironing.
Press and hold the steam button for about
one minute to get steam. Then hold one
more minute in order to clean the steam
generating system. Iron an old towel, to
ensure that any residues inside the iron are
not transferred to the laundry.
Empty the water tank and set the steam
control to position off before storing the
iron.
Do not use any descaling agents.
Clean the soleplate with a damp soft cloth.
Please rinse the laundry properly again.
.
). Put iron in vertical
9
GB
FR
AR
BG
CZ
DE
DK
EE
FA
FI
HR
HU
IT
LT
LV
NO
PL
RO
RU
SE
SI
SK
SR
TR
UA