Using The Tv Macro - Yamaha YSP-600 Bedienungsanleitung

Remote control features

Using the TV macro

The TV macro feature makes it possible to perform a
series of operations with the press of a single button. For
example, when you want to play a DVD, you would
normally turn on the component, select DVD as the input
source, and press the play button to start playback. The TV
macro feature lets you perform all of these operations
simply by pressing the DVD macro button.
Notes
• Be sure to set up a remote control code for your TV before
setting macros.
• The ways to set macros differ if your TV does not have the
tuning capability.
• If you press any control buttons on the remote control other than
the ones used to set macros while setting macros, the setting
procedure is automatically canceled.
• If it takes more than 10 seconds in steps 2 and 3, the setting
procedure is automatically canceled. In this case, repeat from
step 1.
STANDBY/ON
STB VCR
INPUT1
TV
AUTO
VOL MODE SETUP
5BEAM
1
STEREO
4
7
0
CH LEVEL
TEST
VOLUME
MUTE
80
En
POWER POWER
AV TV
DVD AUX
TV
MACRO
INPUT2
INPUTMODE SLEEP
ST+3BEAM 3BEAM
2 3
MY BEAM MY SUR.
5 6
8 9
SUR. DECODE
+10
MENU
TV/AV
ENTER
YSP
RETURN
CH TV VOL
TV INPUT TV MUTE
CODE SET
■ Setting macros for the TV with the
tuning capability
1
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
While holding
down, press
CODE SET
2
Press MACRO while holding down CODE
SET.
TV MUTE
While holding
down, press
CODE SET
3
Press CH +/– or the numeric buttons to select
the TV channel.
Check that the TV screen changes to the tuner screen.
CH
4
Press TV INPUT repeatedly until the screen
changes to the display of the input source
selected in step 1.
TV INPUT
5
Press ENTER to confirm the macro setting.
STB VCR DVD
MACRO
5BEAM ST+3BEAM 3BEAM
2
1 3
STEREO MY BEAM MY SUR.
or
4 5 6
7 8 9
+10
0
ENTER
AUX