Specifications & Features - Velleman VM107 Anleitung

Thank you for buying this module! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, do not install or use it and contact your dealer.
SPECIFICATIONS & FEATURES
Features
Comes in handy for people counting, part counting,
score keeping, ...
Counts up or down.
Count input through on-board pushbuttons or by
external pulses.
Display modes : normal or time (hh:mm and mm:ss).
An internal oscillator allows time measurement.
Programmable pre-set value with equal output.
Self diagnostic at power up.
*Modifications and typographical errors reserved.
WARRANTY
This product is guaranteed against defects in components and construction from the moment it is purchased and for a period of TWO YEAR starting from the date of sale. This guarantee is only valid if the
unit is submitted together with the original purchase invoice. VELLEMAN components Ltd limits its responsibility to the reparation of defects or, as VELLEMAN components Ltd deems necessary, to the
replacement or reparation of defective components. Costs and risks connected to the transport, removal or placement of the product, or any other costs directly or indirectly connected to the repair, will not
be reimbursed by VELLEMAN components Ltd. VELLEMAN components Ltd will not be held responsible for any damages caused by the malfunctioning of a unit.
4
Specifications
Counter input voltage: ...........
EQUAL output: ...................................................
Max. counting speed: .......
Max. count: ...................................
Power supply: ...................................
Power consumption: ..................................................
Dimensions: ...............................
3 - 12Vdc (normal dry contact possible)
5Vdc / max. 50mA
200/sec. (2/sec. with long debounce delay)
4 digits (9999 / 23h59m / 59m59s)
9 - 12Vdc or 2 x 9Vac / 300mA
165 x 90 x 35mm (6,5" x 3.5" x 1,4")
150mA max.