Operation - Velleman 8021 Bedienungsanleitung

OPERATION

CAUTION: Before turning on the power amplifier(s) turn down the volume con-
trol.
F
The +6dB function can be used to adjust the level between the different
sources. That way, when switching over between sources the volume will ap-
proximately remain the same.
(*) When the power-cord is disconnected or after a power failure the memory will be erased.
1. Standby/mute button and indication.
Press this button to turn on the unit
or to mute the sound.
The phones output will not be
muted.
Keep this button pressed to set the
unit in standby.
2. Monitor indication.
See point 4 for use.
3. +6dB indication.
See below for use.
4. Input selection buttons and indica-
tion. Press once to select the input.
Press a second time to turn on the
monitor output.
Press and hold the input selection
button a second time to turn on the
+6dB function for this input. The
+6dB will be memorized (*) each
time the corresponding input is se-
lected. Selecting an input will also
turn on the unit.
5. Phones output.
Remark: This output is not sup-
ported by the mute function.
6. Volume control.
Volume control for both line output
and phones.
Operation
7