Use the toggle switch (1) on the right side of the unit to select
the desired operating mode:
"Heat"
"0" (off) and
"Fan"
2. Set the toggle switch to "Heat" for the heater function and to
"Fan" to use it as a ventilator.
Operating as a Windscreen Defroster
1. To rapidly defrost a windscreen, you can
detach the heater from the mounting base
by pulling it forwards.
2. Use the unit handheld with the swivel-
mounted handle (2).
3. Set the toggle switch to "Heat". Then fold
the handle back in place and reattach the
heater.
Attention:
Please notice that the cigarette lighter socket in most vehicles
only has power while the ignition is turned on.
It is advisable to pull out the power plug from the cigarette
socket while the unit is not in operation to avoid draining the
battery if the unit is turned on accidentally.
Changing the Fuse
To replace the 15 A blade fuse, pull it out of its holder (4) and
replace it with one of the same type and dimensions.
Operation
11