Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Machine Speci c Safety Instructions
Know your Hot Air Gun. Learn the tool's applications and limitations, as well as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock, fire, or serious injury.
• Remove all packaging materials and the transport safeguards, if present. Keep packaging materials away from children –
danger of suffocation!
• Do not place your hand over the air vents or block the vents in any way.
• The nozzle and accessories of this tool become extremely hot during use. Let these parts cool down before touching.
• Always switch the tool off before putting it down.
• Do not leave the tool unattended while it is switched on.
• A fire may arise if the appliance is not used with care
• Heat may be conducted to combustible materials that are out of sight.
• Do not use in a damp atmosphere, where flammable gases may be present or near combustible materials.
• Allow the tool to cool fully before storing.
• Ensure adequate ventilation as toxic fumes may be produced.
• Do not use as a hairdryer.
• Do not obstruct either the air intake or nozzle outlet, as this may cause excessive heat build-up resulting in damage to the
tool.
• Do not direct the hot air blast at other people.
• Do not touch the metal nozzle as it becomes very hot during use and remains hot for up to 30 minutes after use.
• Do not place the nozzle against anything while using or immediately after use.
• Do not poke anything down the nozzle as it could give you an electric shock. Do not look down the nozzle while the unit is
working because of the high temperatures being produced.
• Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time.
• Use only one hand to hold the tool. Do not place your other hand over the air vents.
• Prior to assembly and adjustment always unplug the tool
Operating Instructions
Prior to operation:
• Ensure the switch is in the OFF position when connecting to the mains.
• Mount the correct accessory for the application.
• Set the desired air temperature.
4
1
Fig. 1
2
3
1. ON/OFF switch button
2. Ventilation slots
3. Hook for standing
4. Nozzle
Werbung
