Standard Accessories; Specifications - Hitachi CJ 18DGL Bedienungsanleitung

NAMES OF PARTS (Fig. 1 – Fig. 12)
Switch trigger
1
Handle
2
Lock-off button
3
Chip cover
4
LED light
5
Lever
6
Blade
7
Guide roller
8
Base
9
Change knob
0
Battery (optional accessories)
!
Dust collection adapter (optional accessories)
@
Blade holder
#
Base bolt
$
Hex. bar wrench
%
Semi-circular part
^
Scale
&
Edge
*
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CJ18DGL: Cordless Jig Saw
Read all safety warnings and all instructions.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V Rated voltage
n
No-load speed
0
Wood
Metal
Switching ON
Switching OFF
Disconnect the battery
Prohibited action

STANDARD ACCESSORIES

○ Blade for wood ..............................................................2
○ Blade for steel ...............................................................1
○ Hex. bar wrench ............................................................1
Battery, battery charger and battery cover are not contained.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Cutting various lumber and plunge cutting
○ Cutting mild steel plate, aluminum plate, and copper
plate
○ Cutting plastics, such as phenol resin and vinyl chloride
○ Cutting thin and soft construction materials
○ Cutting stainless steel plate (With No. 97 blade)

SPECIFICATIONS

Model
Voltage
Max. cutting depth
No-load speed
Stroke
Cutting angle range
Weight*
* According to EPTA-Procedure 01/2003
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
CHARGING
Battery and battery charger are not included with this
product.
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in Fig.
10.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
5
English
CJ18DGL
18 V
Wood 65 mm
Aluminum 10 mm
Mild steel 6 mm
Stainless steel 1.5 – 2.5 mm
0 ― 2400 min
-1
25 mm
0 – 45°
2.2 kg (BSL1815)