Fitting The Attachments - Silvercrest PEK 2.3 A1 Bedienungsanleitung

PowerFix PEK 2.3 A1

Fitting the attachments

The device is supplied with the following attachments/fixtures:
Magnet [D]
Double hook [F]
Attachment fixture [H]
Note: The attachment fixture of magnet and double hook attachments must be
slid onto the attachments first due to their size.
50 - English
Place the small barbed hook of the attachment
into the opening provided at the end of the
gooseneck just below the camera head.
Then slide the attachment fixture carefully and
completely over the camera head. Ensure that
the attachment is positioned in the slot provided
in the attachment fixture.
Hook [E]
Mirror [G]