Problem
Suction power is
weak
Motor does not
operate
Motor overheat-
ing
Technical Data
Rated Voltage
Max. Consumption
Rated Output
Cable Length
Hose Length
Weight
Troubleshooting
Cause
Dust filter dirty
Dust container full
Hose blocked
ON/OFF switch not
switched on
Machine not plugged in Plug in power cord
A hot motor is normal if the machine is
running for an extended period of time. If the
machine gets too hot you should switch it off
for 15 minutes and allow it to cool down.
Note: Make sure that the ventilation slots in
the motor casing are not covered while using
the machine.
12 V
10 A
120 W
4 m
1 m
935 g
16
Solution
Clean dust filter
Empty dust
container
Clean hose
Switch to "ON"
position